For Bumper upper fit and surface quality, approve the sample by checking vehicle-specific alignment, mounting points, and direct bolt-on or clip-on installation, then inspect the primed finish for consistent coverage and defects. Confirm dimensions with measurement results and review paint and coating tests. The product specifications list PP, ABS, or carbon fiber and CE certification; verify the selected material and required fitment before approving production.
Fit approval should address both geometry and installation. The product information specifies a front placement and direct bolt-on or clip-on installation. Compare the sample's mounting locations and overall dimensions with the intended vehicle application; dimensional measurement, including CMM measurement, is listed among the product quality checks.
Surface approval should focus on the primed finish and its consistency across the part. Visual inspection and paint and coating testing are listed checks. Record any visible unevenness or damage on the sample and resolve it before production approval.
The listed material options are PP, ABS, and carbon fiber, with a wall thickness of 2.5–5.0 mm. Confirm which material and color are intended for the order: the product data describes the color as OEM colors. The product lists CE certification and Germany EPR compliance; company records also list CE certificates for car bumpers and EPR coverage for several body-part categories.
Danyang Wanjiang Auto Parts Co., Ltd. describes its work as manufacturing and exporting auto body parts, including bumpers, grilles, headlights, hoods, and fenders. Its cooperation case information describes supply to international wholesalers, aftermarket distributors, collision repair chains, and cross-border automotive parts sellers, including markets serving American vehicle series.
| Approval area | What to verify | Available product information |
|---|---|---|
| Fit and geometry | Vehicle alignment, dimensions, edges, and mounting locations | Front placement; dimensional measurement (CMM) listed |
| Installation | Mounting points and installation method on the intended vehicle | Direct bolt-on or clip-on |
| Surface quality | Primed coverage, visible consistency, and coating test results | Primed finish; visual inspection and paint and coating testing listed |
| Material and specification | Confirm the ordered material, color, and wall thickness | PP, ABS, or carbon fiber; OEM colors; 2.5–5.0 mm wall thickness |
| Compliance | Check the applicable product and market requirements | CE certification listed; Germany EPR compliance stated |
Which fit points should be checked on the sample?
Check alignment for the intended vehicle, dimensions, edges, and mounting locations. Confirm that the specified bolt-on or clip-on method works on the sample.
How should the primed surface be approved?
Inspect the surface visually for consistent primed coverage and visible defects, then review the paint and coating test results listed for the product.
What should be confirmed before signing off the sample?
Confirm the intended material, color, wall thickness, fitment, installation method, and applicable compliance requirements. The product data lists PP, ABS, or carbon fiber, OEM colors, a 2.5–5.0 mm wall thickness, CE certification, and Germany EPR compliance.
Approve the Bumper upper sample only after fit, mounting, dimensions, and primed surface checks match the intended order requirements. Confirm material and color selection and review the relevant inspection and compliance information. Danyang Wanjiang lists a minimum order quantity of 5 pieces and a 7-day delivery time for this product. For technical support, contact sales01@cnkebel.com.
Danyang Wanjiang Auto Parts Co., Ltd. is a factory in Danyang, Jiangsu Province, that manufactures car bumpers and exports other auto body parts, including grilles, headlights, engine hoods, and fenders. The company profile states 18 years of OEM/ODM experience and identifies America and Europe as its main markets. Its listed credentials include CE certificates for car bumpers and car lamps, and EPR coverage for several auto body parts.

How do I choose between steel and plastic rear bumpers for a fleet of pickup trucks?
Can you provide the DOT and SAE certification documents for this rear bumper?
How do I choose between heated and non-heated side mirrors for my truck fleet?
How many production lines do you dedicate to making this bumper upper?
Is there an online portal to track aftermarket support for the front bumper assembly?
INQUIRY